MOUNT AIRY, NC—Steve Thomas, former host of the popular PBS series, This Old House (1989-2003), and Renovation Nation (2007-2009) on the Planet Green channel, is used to renovating challenging homes across the U.S. His most recent project, though, was exceptional for two reason: it was his own newly purchased 100-year-old adobe-style home in downtown Santa Fe, NM, and it was a mess.
For help, Thomas turned to someone he met while filming the show in Santa Fe in the 90s: Aaron Lewis, with the local Santa Fe firm Southwest Spray Foam. Lewis and partner, Matt Segura, immediately got to work on the crumbling roof. They removed layer upon layer of tar, and the original roofing small “latillas”, aspen or juniper branches laid across wooden “vigas” or beams, and over 16 tons of dirt. They cleaned it, did extensive repairs to the roof deck then used 6 to 12 inches of spray foam insulation (SPF Insulation) by NCFI Polyurethanes, the U.S. company that pioneered spray foam insulation back in the 1960s, and not coincidentally the company that supplied the insulation for the This Old House episode in the 90s.
After roofing the home with NCFI’s SPF roofing system, EnduraRock, Southwest Spray Foam insulated the rest of the home. Segura says, “Spray foam insulation is super insulation. It gives superior R-value, conforms to any shape—which was really important on these old adobe homes we help save—is a water and air barrier, which makes the house healthier, gives the homeowner amazing energy savings, and allows us to maintain the design integrity of the American Southwest. It’s really the only insulation you can use around here.”
Segura says, “He [Thomas] knows his building materials and building science, and he wanted the best for his home. NCFI is the best, so we used 3 to 4 inches of NCFI’s InsulStar SPF high-performance, closed-cell insulation on the new concrete slab floors covering radiant heat tubing, and 5 to 8 inches on the exterior of the walls. The SPF insulation was then covered with a one-inch layer of cementitious stucco colored to match the neighborhood.” Segura adds the InsulStar works so well Thomas was able to ditch his plans to install air conditioning.
“This home is going to be as low energy cost as it gets in New Mexico,” according to Segura. “NCFI’s products are the best quality in the industry. They know SPF insulation better than anyone, and their support and technical experience with science, codes, and compliance is unparalleled in the building materials field. Aaron and I have been using their products for 25 years.”
Thomas filmed a show in the 1990s in downtown Santa Fe and fell in love with the area, so when he, and his wife Evy Blum, wanted a place to escape the brutal winters of their home off the coast of Maine, they looked to Santa Fe. The couple purchased the crumbling adobe casita in the downtown area in the summer of 2012 then Thomas put his years of renovation knowledge to work, and brought in Southwest Spray Foam.
Since the 1,200 sq. ft house had been built in stages over many decades, and modified many times, there was an assortment of materials to content with: adobe block, frame walls, and penitentiary block—ceramic block manufactured by prisoners at a local penitentiary in the 1950-60s. The aged block is notoriously brittle and difficult to work with. Not only were Thomas, Segura, and Lewis dealing with assorted building materials, they were also dealing with multiple structural designs.
The house needed just about everything—new roofing, thermal protection, air sealing, waterproofing—to meet Santa Fe’s stringent code, and it all work had to be within the historic preservation zoning restrictions of the city and state. The height could not be raised, the interior height of the ceilings could not be changed, and the exterior style and color had to fit into the historical design guidelines. Plus, it had to be comfortable, energy efficient, healthy, sustainable and meet or exceed building codes.
That laundry list was achieved with the use of InsulStar insulation, and the expertise of Segura, Lewis and Southwest Spray Foam. Santa Fe saves a piece of its history, and Thomas and Blum have a healthy, well-insulated place to enjoy their time in New Mexico.
For more information or to arrange an interview on this subject contact
Dale McGlothlin, (202) 341-8615
NCFI, headquartered in Mt. Airy, NC since 1964, manufactures polyurethane
foam chemical systems for spray foam-in-place insulation (SPF), roofing, marine
floatation, packaging, specialty molding, and many other uses. The company
also offers a complete line of flexible foams for furniture seating, transportation
seating, bedding, carpet underlay, and packaging. NCFI also has manufacturing
plants in Hickory, N.C., Dalton, GA., and Salt Lake City, UT. To learn more about
NCFI please visit www.NCFI.com.