"Polyurethane Chemical Systems for Geo-Technical Applications"
Concrete Lifting, Void Fill And Undersealing
Our TerraThane™ product line is designed for Geo-Technical applications,
such as concrete lifting, poly back-fill, rock grout, void fill, under-sealing,
polyurethane grout, crack & joint sealants, protective coatings.
24-003 is a 3.0 to 4.0 lbs per ft3 density, plural component, polyurethane foam designed for concrete lifting and void filling applications. This system is hydrophobic making it ideal for applications where water may be present under or around a concrete slab. This system offers excellent compressive and tensile strength values (based on ASTM test methods) and is highly resistant to chemicals and solvents.
24-486 is a 4.0 lbs per ft3 density, plural component, polyurethane foam ideally suited for concrete lifting and void fill applications. This system has excellent compressive and tensile strengths (based on ASTM test methods) and is highly resistant to chemicals and solvents.
24-486 SLOW is a 4.0 lbs per ft3 density, plural component, polyurethane foam designed for concrete slab undersealing and void filling applications. With an extended reactivity profile (cream time 80 seconds and rise time up to 380 seconds), 24-486 flows and reacts with good undersealing characteristics and minimal lift. This system has excellent compressive and tensile strengths (based on ASTM test methods) and is highly resistant to chemicals and solvents.
24-010 is a 2.5 lbs per ft3 density, plural component, polyurethane foam for concrete lifting and void fill applications. This system is ideally suited for general applications. This system is available in slow, regular and arctic formulations, and offers excellent resistance to chemicals and solvents.
24-031 is a 6.0 lbs per ft3 density, plural component, polyurethane foam for concrete lifting. When higher compressive strength and tensile strength are required, this system is ideally suited for the application.
Product Code
Compressive Strength
(Free Rise) ASTM 1621
Tensile Strength
(Free Rise) ASTM 1623
Compressive Strength (Confined) ASTM 1621
Tensile Strength (Confined) ASTM 1623
24-003
55 psi
70 psi
90 psi
110 psi
24-486
60 psi
82 psi
69 psi
146 psi
24-486 SLOW
60 psi
82 psi
69 psi
146 psi
24-010
35 psi
45 psi
75 psi
75 psi
24-031
120 psi
130 psi
240 psi
220 psi
Single and Plural Component Soil and Rock Stabilization
24-077132 is a hydrophobic, low viscosity (A component 200 cps / B component 340 cps), plural component polyurethane elastomer system designed for rock and soil stabilization applications. Compressive strength of >10,000 PSI and tensile strength of >8,100 PSI make this ideal for rock stabilization. This product is available in 55 gallon drums sets and 275 gallon tote sets.
24-015 is a single component, low viscosity (100 cps), polyurethane grout ideally suited for soil stabilization and water cutoff applications. Compressive strength exceeds 1,000 PSI. This product is available in 5 gallon buckets, 55 gallon drums, and 275 gallon totes.
Pipe Line Trench Breaker and Pillows
24-014 is a 2.1 lbs per ft3 density, specially developed, plural component, polyurethane foam that when applied in great thicknesses or quantities will not char or burn. This system is formulated for constructing pipe line trench breakers, pipe pads, and pillows. This system can also be used for substitute back fill where high compressive strength and stability is required.
Poly Backfill and Cavity Fill
23-004 is a 2.65 lb per ft3 density, closed cell, plural component, polyurethane foam designed for masonry cavity fill and other void filling applications. It is formulated for use where building codes specify 25 flame spread and less than 450 smoke density based on ASTM E-84 test procedure.
24-014 is a 2.1 lbs per ft3 density, specially developed, plural component, polyurethane foam that when applied in great thicknesses or quantities will not char or burn. This system is formulated for constructing pipe line trench breakers, pipe pads, and pillows. This system can also be used for substitute back fill where high compressive strength and stability is required.
Mine Reclamation Products, Systems and Services
NCFI Polyurethanes is pleased to announce that Foam Concepts LLC is now our exclusive authorized distributor for mine related foam products and delivery systems.
Since 1994, Foam Concepts LLC has been working with mine industry professionals to specify and supply specially designed polyurethane foam systems and application methods.
Typical applications include: abandoned mine closures, blast hole and core hole plugs, well and sinkhole sealing and various other sealing applications.
Foam Concepts LLC sponsors and participates in numerous organizations and trade associations which include the National Association of Abandoned Mine Land Programs, American Society of Mining and Reclamation and Montana Tech Mine Design, Operations and Closure Conference.
Crack and Joint Sealing
24-017 is a plural component, polyurea, crack sealing system developed for sealing cracks and joints in concrete and asphalt. This system can also be used for wood and masonry applications. This system can be machine processed or applied using various types of plural component caulking guns, and it can be formulated in various colors such as Lt Gray, Black, Brick Red or White.
Post and Pole Setting
24-008 is a 3.75 lbs per ft3 density, plural component, polyurethane foam with excellent strength developed for and used to set posts and poles in various applications. In addition the reaction times are designed for easy mixing and hand pour applications.
Miscellaneous Polyurethane Systems and Protective Coatings
NCFI Polyurethanes offers numerous other systems for geo-technical, industrial, and commercial applications. Other applications include: high temperature insulation, USCG approved floatation foam, general purpose insulation foam, and slow rise cavity fill products. Coatings include: various polyureas, elastomeric, urethane, silicone and butyl.
NCFI Equipment Parts and Service
NCFI is an authorized Graco® distributor with a complete inventory of Graco® equipment and parts. These include plural component spray machines and coating rigs. NCFI maintains a complete inventory of repair parts on hand ready for immediate delivery in most cases. We also design and build complete trailer rigs to meet numerous applications and can rig box and van type vehicles. Our factory trained technical support team offers classroom and on-site operator training, and on-site equipment troubleshooting and diagnosis.
Contact us for equipment training school dates and times or call to schedule an equipment evaluation and operator training session. www.spfequipmentstore.com
